Displays 4 calls simultaneously Other calls are held in queue and shown on screen in order of priority Adjustable 5 digits can show room and bed number LED indicator shows call status Red – Normal Call Green – Nurse Presence Blue – Emergency / WC Call 433 MHz wireless frequency Can output active calls and logs to an Air Basic Reporter Software installed PC via serial port Programmable manually using on-device buttons Supports up to 64 Air Call Units Audio alerts in different tones according to call type Mute mode
The Air Bedside Call Unit is used in patient rooms. There are call and cancel buttons on the unit. In an emergency, a patient uses the call button to make an emergency call which appears as an alert on the Nurse Panel. Typical locations for this unit are on the walls of patient rooms and living areas. • Air Patient Handsets work through connection to this unit • Can be flush mounted and has an ergonomic design • Battery lasts up to 5000 calls • Made of high quality PC-ABS-FR Raw Materials
The Air Patient Handset allows the patient’s condition to be reported quickly to hospital staff in an emergency situation. The device works through connection to the Air Bedside Call Unit. Easy-to-understand labels indicate the functions of the buttons.
The Air Pull-cord Call Unit is used in patient bathrooms or similar areas. There is a cancel button and an emergency call pull-cord on the unit. In an emergency, the patient makes an emergency call by pulling the cord. This appears as a WC Emergency Call on the Nurse Panel. The system gives priority to WC Emergency calls and they appear before nurse calls.
Air Over Door Light The Air Over Door Light is located above the patient room door in the corridor. Its half-sphere shape makes it easily noticeable from any angle of view. It can indicate the call status of the room with 3 main colors, red, green, and blue. It has very low energy consumption with environment-friendly LEDs. It is typically surface mounted but can also be flush mounted if preferred. 3 different colors (red, green, blue) Very low energy consumption Environment friendly LEDs
Expands signal coverage between Air Call Units and Air Nurse Panels when necessary. There is no restriction on the number of repeaters that can be used. Requires external 5V DC Power Supply.
